Alliance-DIN — все о стандартах

AGMA 911 — Design Guidelines for Aerospace Gearing-Replaces AGMA 411.02

API STD 1529 — Aviation Fueling Hose

API SPEC 1581 — Specifications and Qualification Procedures for Aviation Jet Fuel Filter/Separators

API SPEC 1583 — Specifications and Qualification Procedures for Aviation Fuel Filter Monitors with Absorbent Type Elements

API STD 1542 — Identification Markings for Dedicated Aviation Fuel Manufacturing and Distribution Facilities, Airport Storage and Mobile Fueling Equipment

ASTM D 471 — Standard Test Method for Rubber Property — Effect of Liquids

ASTM E 1742 — Standard Practice for Radiographic Examination

ASTM E 399 — Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials

AWS D17.1 — Specification for Fusion Welding for Aerospace Applications

BSI BS EN 2282 — Characteristics of Aircraft Electrical Supplies

BSI BS EN 2424 — Marking of Aerospace Products

ICAO 7030 — Regional Supplementary Procedures

AIA/NAS NAS 1149 — Washer, Flat

AIA/NAS NAS 410 — NAS Certification & Qualification of Nondestructive Test Personnel

AIA/NAS NASM21209 — Insert, Screw Thread, Coarse and Fine, Screw Locking, Helical Coil, Cres-Rev. 1; FSC 5325

AIA/NAS NASM33537 — Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for-FSC 5340

NEMA WC 27500 — Standard for Aerospace and Industrial Electrical Cable

RTCA DO-160 — Environmental Conditions and Test Procedures for Airborne Equipment

SAE AMS 2644 — Inspection Material, Penetrant

SAE AMS-H-6875 — Heat Treatment of Steel Raw Materials-Should Be Used Instead of MIL-H-6875, Which Was Cancelled on 2 February 1999

SAE AS 478 — Identification Marking Methods

SAE AS 9100 — Quality Management Systems — Aerospace — Requirements-Technically Equivalent to AECMA prEN 9100

SAE AS 9102 — (R) Aerospace First Article Inspection Requirement-Technically Equivalent to AECMA prEN 9102; Superseding SAE AS 9012
Скрыть

ANSI A92.2 — Vehicle-Mounted Elevating and Rotating Aerial Devices-Now Copyrighted by SIA

ASME B00090 — Section VIII: Division 3, Alternative Rules for Construction of High Pressure Vessels-Replaces ASME S00090: 12/2001

ASME PALD — Safety Standard for Portable Automotive Lifting Devices

ASTM D 2000 — Standard Classification System for Rubber Products in Automotive Applications-SAE J200

FORD W-HTX — Control of Heat Treating Processes and Auxiliary Equipment

FORD WSS-M99P9999-A1 — Standard Requirements for Production Materials

FORD WSS-M99P1111-A — Restricted Substance Management Standard

GMNA GM9070P — Procedure for Testing Flammability of Materials

GMNA GM9540P — Accelerated Corrosion Test

GMNA GM9900P — Cleaning/Solvent Resistance of Automotive Components During Normal Customer Use

GME GME 00252 — Electrolytically Deposited Metallic Coatings

GME GME 60402 — Determining the Scratch Resistance of Organic Coating

GME GMI 60206 — Determination Resistance to Corrosion of Automotive Components by Salt Spray Fog Testing (Formerly GME 60206)-English Translation Available; ITDC Release, Draft for Harmonization

GME GMI 60266 — Determination to Resistance to Cleaning Agents of Automotive Trim Components (Formerly GME 60266)-English Translation Available; ITDC Release, Draft for Harmonization

GMW GMW3059 — Restricted and Reportable Substances for Parts-Engl

GMW GMW3116 — Recyclability, Recoverability Guidelines-Engl

GMW GMW3172 — General Specification for Electrical/Electronic Component Analytical/Development/Validation (A/D/V) Procedures for Conformance to Vehicle Environmental, Reliability, Durability, and Performance Requirements-Engl

GMW GMW3232 — Test Method for Determining the Flammability of Interior Trim Materials-Engl

ISUZU ISA-E-005 — General Tolerance (Machining) — Part 1: Tolerance for Linear and Angular Dimensions Without Individual Tolerance Indications

GME QT 001130 — Pressure Welded Joints (Formerly ON 1130.9)

AIAG Q7-K — DiamlerChrysler, Ford, and General Motors Supplier Quality Requirements QS 7 Pack **** Includes AIAG Manuals QS-9000, QSA, APQP, MSA, SPC, PPAP and FMEA

SAE SAE HDBK — SAE Handbook — Individual Volumes Are not Available — Hardbound

SAE J400 — Test for Chip Resistance of Surface Coatings

SAE J403 — Chemical Compositions of SAE Carbon Steels-Supersedes Ford ESN-M1A46-A

SAE J514 — Hydraulic Tube Fittings
Скрыть

ACI 318/318R — Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary (ACI 318R-02)

ACI 318M/318RM — Building Code Requirements for Structural Concrete (ACI 318M-02) and Commentary (ACI 318RM-02) — Metric Version

ANSI A14.2 — Ladders — Portable Metal — Safety Requirements

ANSI A14.3 — Fixed Ladders — Safety Requirements

BSI BS 5950-1 — Structural Use of Steelwork in Buildings Part 1: Code of Practice for Design Rolled and Welded Sections

ICC ICC/ANSI 2.0 — Manufactured Housing Construction and Safety Standards (MHCSS)

ICC IBC — International Building Code

ICC IEBC — International Existing Building Code

ICC PCBF — International Performance Code for Building and Facilities

IESNA RP-7 — Lighting Industrial Facilities

NEMA TC 3 — Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing

NEMA TC 6 & 8 — Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installations

NFPA 70 — National Electrical Code

NFPA 72 — National Fire Alarm Code

NFPA 90A — Standard for the Installation of Air-Conditioning and Ventilating Systems
Скрыть

IEEE C2 — National Electrical Safety Code

IEEE C63.4 — American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

IPC A-610 — Acceptability for Electronic Assemblies

ECA J-STD-001 — Requirements for Soldered Electrical and Electronic Assemblies

ECA J-STD-002 — Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

EIA-364-71 — TP-71C Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets

EIA-772 — User’s Application Guide to Fuses

DLA MIL-STD-202 — Test Method Standard Electronic and Electrical Component Parts

DLA MIL-STD-883 — Test Method Standard Microcircuits

NEMA 250 — Enclosures for Electrical Equipment (1000 Volts Maximum)

NEMA BU 1.1 — General Instructions for Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less

NEMA MG 1 — Motors and Generators

NEMA MW 1000 — Magnet Wire

NFPA 79 — Electrical Standard for Industrial Machinery

RIA R15.06 — Industrial Robots and Robot Systems — Safety Requirements

TIA TIA-485 — Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems

TIA TIA/EIA-644 — Electrical Characteristics of Low Voltage Differential Signaling (LVDS) Interface Circuits
Скрыть

ARMY FED-STD-141 — PAINT, VARNISH, LACQUER AND RELATED MATERIALS: METHODS OF INSPECTION, SAMPLING AND TESTING

NAVY MIL-A-8625 — ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS

NAVY MIL-C-5541 — CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS

ARMY MIL-DTL-13924 — COATING, OXIDE, BLACK, FOR FERROUS METALS

AIR FORCE MIL-HDBK-217 — RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT

DLA MIL-HDBK-454 — GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT

DLA MIL-PRF-38535 — INTEGRATED CIRCUITS (MICROCIRCUITS) MANUFACTURING, GENERAL SPECIFICATION FOR

AIR FORCE MIL-S-007742 — SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES: GENERAL SPECIFICATION FOR

ARMY MIL-STD-105 — SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES

ARMY MIL-STD-129 — MILITARY MARKING FOR SHIPMENT AND STORAGE

AIR FORCE MIL-STD-130 — IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

DLA MIL-STD-202 — TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS

NAVY MIL-STD-2073 — STANDARD PRACTICE FOR MILITARY PACKAGING

AIR FORCE MIL-STD-810 — ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

DLA MIL-STD-883 — TEST METHOD STANDARD MICROCIRCUITS

NAVY NAVSEA S9074-AQ-GIB-010 — REQUIREMENTS FOR WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION

DLA QPL-83536 — RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR

AIR FORCE QPL-SAE-AMS-2644 — INSPECTION MATERIAL, PENETRANT

NATO STANAG 2895 — Extreme Climatic Conditions and Derived Conditions for Use in Defining Design/Test Criteria for NATO Forces Materiel-Amendment 1: 07/31/2001

NATO STANAG 3350 — Analogue Video Standard for Aircraft System Applications-Amendment 1, 3/26/98
Скрыть

ANSI A14.3 — FIXED LADDERS — SAFETY REQUIREMENTS

ASSE Z117.1 — Safety Requirements for Confined Spaces

ASSE Z244.1 — Control of Hazardous Energy Lockout/Tagout and Alternative Methods

ASSE Z490.1 — Accepted Practices in Safety, Health and Environmental Training

NEMA Z535 SERIES — Safety Color Code — environmental Facility Safety Signs — Criteria for Safety Symbols — Product Safety Sign & Labels and Accident Prevention Tags-Contains Z535.1, Z535.2, Z535.3, Z535.4, and Z535.5

NEMA Z535.4 — Product Safety Signs and Labels

ASHRAE 62.1 — Ventilation for Acceptable Indoor Air Quality

ASME A17.1 — Safety Code for Elevators and Escalators

ASME B56.1 — Safety Standard for Low Lift and High Lift Trucks

ASME B00081 — Section IV: Heating Boilers-Replaces ASME S00081: 12/2001

ASTM E 1864 — Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and Around Buildings and Related Structures

BSI BS EN 60335-1 — Household and Similar Electrical Appliances Safety Part 1: General Requirements

BSI BS EN 61010-1 — Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 1: General Requirements

BSI OHSAS 18001 — Occupational Health and Safety Management Systems Specification

BSI OHSAS 18002 — Occupational Health and Safety Management Systems Guidelines for the Implementation of OHSAS 18001

IEC 60204-1 — Safety of Machinery — Electrical Equipment of Machines — Part 1: General Requirements

IEC 60825-1 — Safety of Laser Products — Part 1: Equipment Classification, Requirements and User´s Guide

IEC 60950-1 — Information Technology Equipment — Safety — Part 1: General Requirements

ISO 14000 SERIES — ISO 14000 Series on Environmental Management — See Also ISO 14000 HDBK and ISO 14000 COMPENDIUM

ISO 14644-1 — Cleanrooms and Associated Controlled Environments — art 1: Classification of Air Cleanliness

ISO 14644-2 — Cleanrooms and Associated Controlled Environments — Part 2: Specifications for Testing and Monitoring to Prove Continued Compliance with ISO 14644-1

RTCA DO-160 — Environmental Conditions and Test Procedures for Airborne Equipment-Includes: Advisory Circular

UL 60601-1 — UL Standard for Safety Medical Electrical Equipment, Part 1: General Requirements for Safety
Скрыть

AAMI HE74 — Human Factors Design Process for Medical Devices

AAMI SW68 — Medical Device Software — Software Life Cycle Processes

AAMI TIR12 — Designing, Testing and Labeling Reusable Medical Devices for Reprocessing in Health Care Facilities: A Guide for Device Manufacturers

ANSI Z80.3 — Ophthalmics Nonprescription Sunglasses and Fashion Eyewear Requirements

ASTM 13.01 — Medical and Surgical Materials and Devices; Anesthetic and Respiratory Equipment

ASTM F 1980 — Standard Guide for Accelerated Aging of Sterile Medical Device Packages

BSI BS EN 1041 — Information Supplied by the Manufacturer with Medical Devices

BSI BS EN 60601-1-2 — Medical Electrical Equipment — Part 1-2: General Requirements for Safety — Collateral Standard: Electromagnetic Compatibility — Requirements and Tests-IEC 60601-1-2: 2001

BSI BS EN 980 — Graphical Symbols for Use in the Labelling of Medical Devices

BSI BS EN ISO 14971 — Medical Devices — Application of Risk Management to Medical Devices

EU 93/42/EEC — Commission Communication in the Framework of the Implementation of Council Directive in Relation to Medical Devices (1)-98/C 144/02; Text with EEA Relevance

EU 98/79/EC — Directive of the European Parliament and of the Council on in Vitro Diagnostic Medical Devices

IEC 60601-1 — Medical Electrical Equipment Part 1: General Requirements for Safety

IEC 60601-1-1 — Medical Electrical Equipment — Part 1-1: General Requirements for Safety — Collateral Standard: Safety Requirements for Medical Electrical Systems

ISO 11607 — Packaging for terminally sterilized medical devices

ISO 13485 — Medical devices Quality management systems Requirements for regulatory purposes

ISO 14971 — Medical Devices — Application of Risk Management to Medical Devices

ISO 15223 — Medical devices Symbols to be used with medical device labels, labelling and information to be supplied

ISO 17025 — General Requirements for the Competence of Testing and Calibration Laboratories-First Edition; Cancels and Replaces ISO/IEC Guide 25: 1990

NEMA NU 1 — Performance Measurements of Scintillation Cameras

NEMA NU 2 — Performance Measurements of Position Emission Tomographs-Replaces NU 1:1994

NFPA 99 — Standard for Health Care Facilities

UL 60601-1 — UL Standard for Safety Medical Electrical Equipment, Part 1: General Requirements for Safety-Replaces UL 2601-1
Скрыть

ASME A13.1 — Scheme for the Identification of Piping Systems

ASME B16.34 — Valves — Flanged, Threaded, and Welding End

ASME B16.5 — Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard

ASME B31.1 — Power Piping

ASME B31.3 — Process Piping

ASME B31.8 — Gas Transmission and Distribution Piping Systems

ASME B00081 — Section IV: Heating Boilers-Replaces ASME S00081: 12/2001

API API 510 — Pressure Vessel Inspection Code: Maintenance Inspection, Rating, Repair, and Alteration-Eighth Edition

API API 570 — Piping Inspection Code Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems

API RP 14C — Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms

API RP 579 — Fitness-for-Service

API SPEC 5CT — Specification for Casing and Tubing

API SPEC 5D — Specification for Drill Pipe

API SPEC 5L — Specification for Line Pipe

API SPEC 6A — Specification for Wellhead and Christmas Tree Equipment

API SPEC 7 — Specification for Rotary Drill Stem Elements

API STD 650 — Welded Steel Tanks for Oil Storage

API STD 653 — Tank Inspection, Repair, Alteration, and Reconstruction

API STD 1104 — Welding of Pipelines and Related Facilities

API STD 1160 — Managing System Integrity for Hazardous Liquid Pipelines

ASTM 01.05 — Steel-Bars, Forgings, Bearing, Chain, Springs

ASTM 02.05 — Metallic and Inorganic Coatings; Metal Powders, Sintered P/M Structural Parts

ASTM D 1250 ADJ V1 — Petroleum Measurement Tables Volume Correction Factors Volume I Table 5A — Generalized Crdue Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F & Table 6A — Generalized Crude Oils Correction of Volume to 60 Degrees F Against API

IEEE 841 — Standard for Petroleum and Chemical Industry — Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors — Up to and Including 370 kW (500 hp)

IEEE C57.12.00 — Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers

IEEE C57.12.90 — Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers

ISO 228-1 — Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads — Part 1: Dimensions, Tolerances and Designation-Fourth Edition

ISO 3183-1 — Petroleum and Natural Gas Industries — Steel Pipe for Pipelines — Technical Delivery Conditions — Part 1: Pipes of Requirement Class A

ISO 17776 — Petroleum and Natural Gas Industries — Offshore Production Installations — Guidelines on Tools and Techniques for Hazard Identification and Risk Assessment

MSS SP-55 — Quality Standard for Steel Castings for Valves, Flanges, Fittings and Other Piping Components — Visual Method for Evaluation of Surface Irregularities

PFI ES-3 — Fabricating Tolerances

UL 58 — UL Standard for Safety Steel Underground Tanks for Flammable and Combustible Liquids
Скрыть

ISO 9001:2008 — Quality management systems — Requirements

AIAG QS9000 — Quality System Requirements

API SPEC Q1 — Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry

ASME NQA-1 — Quality Assurance Requirements for Nuclear Facility Applications

ASNT TC-1A — Recommended Practice, Personnel Qualification and Certificationin Nondestructive Testing

ASQ A8402 — Quality Management and Quality Assurance — Vocabulary-ISO 8402:1994; ASQ A8402-1994 is a Revision and Redesignation of ASQ A3-1987

ASQ Q9000 — Quality Management Systems — Fundamentals and Vocabulary

ASQ Q9001 — Quality Management Systems — Requirements

BSI BS EN 46001 — Application of EN ISO 9001 to the Manufacture of Medical Devices

GEIA EIA-649 — National Consensus Standard for Configuration Management

GEIA GEIA-4899 — Standard for Preparing an Electronic Components Management Plan

ISO 10005 — Quality Management — Guidelines for Quality Plans

ISO 10006 — Quality Management Systems Guidelines for Quality Management in Projects

ISO 10007 — Quality Management Systems Guidelines for Configuration Management

ISO 10012 — Measurement Management Systems — Requirements for Measurement Processes and Measuring Equipment

ISO 10015 — Quality Management — Guidelines for Training

ISO 13485 — Medical Devices Quality Management Systems Requirements for Regulatory Purposes

ISO 14000 CD — ISO 14000 Series — Environmental Collection

ISO 14000 SERIES — ISO 14000 Series on Environmental Management — See Also ISO 14000 HDBK and ISO 14000 Compendium

ISO 19011 — General Requirements for the Competence of Testing and Calibration Laboratories-Cancels and Replaces ISO/IEC Guide 25: 1990

ISO 9000 COLLECTION 1 — Guidelines for Quality and/or Environmental Management Systems Auditing-Replaces ISO 10011-1:1990, ISO 10011-2:1991, ISO 10011-3:1991, ISO 14010:1996, ISO 14011:1996, and ISO 14012:1996

ISO 9000 COMPENDIUM — ISO 9000 Collection 1 — Includes the 2000 Revisions of ISO 9000, ISO 9001, and ISO 9004

ISO 9001 — Internaitonal Standards for Quality Management-10th Edition

ISO 9002 — Quality Management Systems — Requirements-Third Edition; Supersedes ISO 9002:1994 and ISO 9003:1994

ISO 9004 — Quality Systems — Model for Quality Assurance in Production, Installation and Servicing

ISO TR 10013 — Quality Management Systems — Guidelines for Performance Improvements-Supersedes ISO 9004-1:1994

ISO TR 10014 — Guidelines for Quality Management System Documentation

ISO 17025 — Guidelines for Managing the Economics of Quality

ISO TS 16949 — Quality Management Systems Particular Requirements for the Application of ISO 9001:2000 for Automotive Production and Relevant Service Part Organizations

NCSL Z540.1 — Calibration Laboratories and Measuring and Test Equipment — General Requirements-Replaces Mil-Std-45662

SAE AS 9006 — Deliverable Aerospace Software Supplement for AS9100A Quality Management Systems — Aerospace — Requirements for Software (based on AS9100A)

SAE AS 9100 — Quality Management Systems — Aerospace — Requirements-Technically Equivalent to AECMA prEN 9100

SAE AS 9110 — Quality Maintenance Systems — Aerospace — Requirements for Maintenance Organizations

SAE AS 9120 — Quality Management Systems — Aerospace Requirements for Stockist Distributors
Скрыть

ANSI INCITS 263 — Information Technology — Fibre Distributed Data Interface (FDDI) — Token Ring Twisted Pair Physical Layer Medium Dependent (TP-PMD)-Replaces ANSI X3.263-1995

IEEE 802.11 — Information Technology — Telecommunications and Information Exchange between Systems — Local and Metropolitan Area Networks — Specific Requirements — Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications-IEEE Computer Society Document; ISO/IEC 8802-11; Amendment 802.11D — 04/13/2001; Amendment 802.11G — 06/27/2003; Amendment 802.11H — 10/14/2003; Amendement 802.11I — 6/24/2004; Amendment 802.11J — 9/23/2004

IEEE 802.3 — Standard for Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications-IEEE Computer Society Document; Amendment AE: June 13, 2002; Amendment AF: June 18, 2003; Amendment AJ: September 26, 2003; Amendment AK: February 9, 2004; Amendment AH: June 24, 2004

ISO 11801 — Information Technology — Generic Cabling for Customer Premises

TIA J-STD-607 — Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications

NEMA PB 1.1 — General Instructions for Proper Installation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less

TIA TIA-222 — Structural Standards for Steel Antenna Towers and Antenna Supporting Structures

TIA TIA-464 — Requirements for Private Branch Exchange (PBX) Switching Equipment

TIA TIA-569 — Commercial Building Standard for Telecommunications Pathways and Spaces

TIA TIA-570 — Residential Telecommunications Infrastructure Standard

TIA TIA-603 — Land Mobile FM or PM — Communications Equipment — Measurement and Performance Standards

TIA TIA-95 — Mobile Station-Base Station Compatibility Standard for Wideband Spread Spectrum Cellular Systems

TIA TIA-968 — Telecommunications Telephone Terminal Equipment Technical Requirements for Connection of Terminal Equipment to the Telephone Network

TIA 102 SERIES — Telecommunications, Land Mobile Communications (APCO/Project 25)

TIA TIA/EIA-41 — Cellular Radiotelecommunications Intersystem Operations2

TIA TIA/EIA-606 — Administration Standard for the Telecommunications Infrastructure

TIA TIA/IS-707 — Data Services Options for Spread Spectrum Systems Addendum 3 — cdma2000 High Speed Packet Data Service Option 33

UL 60950 — UL Standard for Safety Safety on Information Technology Equipment-Replaces UL 1950
Скрыть

AWS D1.5M/D1.5 — Bridge Welding Code-AASHTO BWC-4

AA H35.1 — Alloy and Temper Designation Systems for Aluminum

AA H35.2 — Dimensional Tolerances for Aluminum Mill Products

AFS Z241.2 — Safety Requirements for Melting and Pouring of Metals in the Foundry Industry

ASNT CP-189 — Qualification and Certification of Nondestructive Testing Personnel

ASNT TC-1A — Recommended Practice, Personnel Qualification and Certificationin Nondestructive Testing

ASTM 02.04 — Nonferrous Metals-Nickel, Cobalt, Lead, Tin, Zinc, Cadmium, Precious, Reactive, Refractory Metals and Alloys; Materials for Thermostats, Electrical Heating and Resistance Contacts, and Connectors

ASTM 03.01 — Metals — Mechanical Testing; Elevated Temperature Tests; Metallography

ASTM B 209 — Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

ASTM B 221 — Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

ASTM B 633 — Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

ASTM DS 56 — Metals and Alloys in the Unified Numbering System (UNS) — Also See ASTM DS 56 CD; Also See ASTM DS 56 COMBO; Same as SAE HS 1086

ASTM E 1417 — Standard Practice for Liquid Penetrant Examination

ASTM E 1444 — Standard Practice for Magnetic Particle Examination

ASTM E 18 — Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

AWS A2.4 — Standard Symbols for Welding, Brazing, and Nondestructive Examination

AWS A3.0 — Standard Welding Terms and Definitions Including Terms for Adhesive Bonding, Brazing, Soldering, Thermal Cutting, and Thermal Spraying

AWS A5.12/A5.12M — Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting

AWS A5.8/A5.8M — Specification for Filler Metals for Brazing and Braze Welding

AWS API-M — Code Clinic for Study of API Standard 1104 Nineteenth Edition Welding of Pipelines and Related Facilities — Reference Manual

AWS B1.10 — Guide for the Nondestructive Examination of Welds

AWS B1.11 — Guide for the Visual Examination of Welds

AWS B2.1 — Specification for Welding Procedure and Performance Qualification

AWS CC-RM — Code Clinic for Study of AWS D1.1 Structural Welding Code-Steel — Reference Manual3

AWS CM — Certification Manual for Welding Inspectors

AWS D1.1/D1.1M — Structural Welding Code — Steel

AWS D1.2/D1.2M — Structural Welding Code Aluminum

AWS D1.3 — Structural Welding Code — Sheet Steel

AWS D1.4 — Structural Welding Code — Reinforcing Steel

AWS D1.6 — Structural Welding Code — Stainless Steel

AWS D17.1 — Specification for Fusion Welding for Aerospace Applications

AWS VIW-M — Visual Inspection Workshop Reference Manual

AWS WI — Welding Inspection Handbook

AWS WIT-T — Welding Inspection Technology

AWS WIT-W-99 — Welding Inspection Technology Wookbook

AWS Z49.1 — Safety in Welding, Cutting and Allied Processes

AWS D16.2/D16.2M — Guide for Components of Robotic and Automatic Arc Welding Installations

ISO 1456 — Metallic Coatings — Electrodeposited Coatings of Nickel Plus Chromium and of Copper Plus Nickel Plus Chromium

ISO 1463 — Metallic and Oxide Coatings — Measurement of Coating Thickness — Microscopical Method

NEMA EW 1 — Electric Arc Welding Power Sources

RWMA RESISTANCE WELDING — Resistance Welding Manual

SAE AMS 2644 — Inspection Material, Penetrant
Скрыть